Stainless Steel Mist Ring |
 |
To retrofit your existing fan. |
Part #
GCR84
GCR154
GCR158
GCR210
GCR188
GCR210
GCR212 |
Fan Size
12”
18” - 24”
18” - 24”
18” - 24”
30”
30”
36” - 42” |
Ring Size
8”
15”
15”
10” & 18”
18”
10” & 20”
14” & 24” |
Stages
1
1
1
2
1
2
2 |
Nozzles
4
4
8
10
8
10
12 |
|
| |
|
12” Circulation Fan |
 |
GC12VK
Energy efficient, low noise fan motor. 8” stainless steel misting ring with 4
anti-drip nozzles. Oscillators optional. Standard hose connection included. |
| |
|
30” to 36” Wall Mount Fans |
 |
GC30WM or GC36WM
• 30” or 36” wall mount or oscillating post mount
• 30” fan has 9800 cfm
• 36” fan has 11000 cfm
• Both have plastic shrouds
• 1/2 HP tefc direct drive motors
• Whisper quiet fan blades
• 3/8” stainless steel mist ring with 10 nozzles
• Brazed stainless steel manifold hose |
| |
|
Oscillating Fan Motors |
 |
Contact us for details |
| |
|
<< Back to Misting Accessories Categories
Transformers, Contactors, Control Boxes, Water & Drain Valves
<< Back to Misting Accessories Categories
|
Water Inlet Valves (Brass) 300 PSI |
 |
GCIV-1 3/8" Port - Normally closed inlet valve
GCIV-2 1/2" Port - Normally closed inlet valve
GCIV-3 3/4" Port - Normally closed inlet valve |
| |
|
Drain Valves (Stainless Steel) 1,050 PSI |
 |
GCDV-1 1/4" Port - Normally opened drain valve
GCDV-2 3/8" Port - Normally opened drain valve |
| |
|
Coil Options |
 |
GCOIL-1 24 v - 50 / 60 Hz
GCOIL-2 120 v - 50 / 60 Hz
GCOIL-3 240 v - 50 / 60 Hz
Long / Short |
| |
|
Two Stage Valves |
 |
TS 1000 1 3/8 part normally closed
TS 1000 2 1/2 part normally closed |
| |
|
Drain Valves |
|
ZV 1000 1 3/8 part normally closed |
| |
|
Zone Relays |
 |
GC24R10 24 VAC 10 Amp Relay
GC24R12 24 VAC 12 Amp Relay
GC24OR 240 VAC 25 Amp Relay |
|
|
<< Back to Misting Accessories Categories
Injector, Timing, & Control Equipment
<< Back to Misting Accessories Categories
|
Dosatron Chemical Injectors |
 |
Water-driven & proportional. Pressure and water flow changes do not effect operation. Volumetric metering ensures accuracy, reliability and repeatability. On-demand dispensing eliminates waste.
GCDI16
GCDI150
GCDI210
Flow Rng
Pressure Rng
Injection Rng |
11 gpm 1:500 to 1:64- .2 to 1.6%
11 gpm- 1:100 to 1:20- 1.0 to 5%
11 gpm- 1:50 to 1:10- 2.0 to 10%
6 oz. to 11 gallons per minute
4.3 to 85 psi
1:5000 (0.2%) to 1:64 (1.6%) |
|
| |
|
Booster Pumps |
 |
300 psi booster pumps
1/4” push lock ports |
| |
|
Transfer Pumps |
 |
On demand pump 45 psi
1/2” mail ports 120 volt |
